1. The workpiece is easy to clamp, and the workpiece can be clamped with general fixtures such as flat pliers, pressure plates, indexing heads, rotary workbenches, etc., and the clamping and positioning of the workpiece is convenient.
2. The dynamic track of the tool is easy to observe, and the debugging program is convenient for inspection and measurement, so that the problem can be found in time and stopped or modified.
3. The cooling conditions are easy to establish, and the cutting fluid can directly reach the tool and the machining surface.
4. The coordinate system is the three coordinate axes of XYZ and the Cartesian coordinate system, which feels intuitive and is consistent with the perspective of the pattern.
5. The chips are easy to remove and fall, so as to avoid the chips cutting the machined surface.
6. The structure generally adopts a single-column type, which is simple in structure, small in area and low in price compared with the corresponding horizontal machining center.
7. When the vertical machining center processes the workpiece with a relatively small size in the Z-axis direction, in general, in addition to the bottom surface, the remaining five surfaces can be contoured and surface processed with different tools.