1. Theoretical basis
The training must start from the theoretical training, and the operator must pass the theoretical assessment before the practical operation training. If the theoretical training is not passed, the operation training will not be carried out.
2. Use problems
After the theoretical training, the training of the tools must be carried out. The operator must be clear about the common tools, engraving motor speed, travel speed, precautions, etc., and the operator must be familiar with the application of the tool.
3. Scope of application
The operator must be familiar with the application range of various materials, familiar with different materials, different thicknesses, different finished product sizes, etc. Familiarize yourself with different carving styles of different materials.
4. Operation of the software
Software training can only be carried out after passing the above training. The training of the software is mainly focused on the field of user application; For areas that are not needed by the user, they can learn on their own according to the training manual. The requirements of the software are: various layouts of the software, various operations, generation of paths, and errors that can quickly find paths.
5. Machine operation training
After the above various trainings, after the explanation of the trainers and the understanding and assessment of the operators: the operators are trained on operation safety and operation precautions, and the operators can be trained on the machine operation after the trained personnel sign and approve the operation safety precautions.